| Total Views: 176 - Total Replies: |
|
| POSTED BY: sthrnfat on 01/17/2008 | 08:01 PM |
|
Want to convert an existing geared frame to SS. Is the singlator reliable? Don't want the chain jumping around.
Any other recommendations on a conversion tool to keep the chain tension high enough to prevent chain jump?
Posted this under drivetrain by mistake... |
|
| POSTED BY: CL__ on 01/29/2008 | 07:55 PM |
|
my vote is the convert
worked really well on the beater
does not have a super big roller to bind, snag, etc...
easy to adjust to chain line also
|
| Back To Top |
|
| POSTED BY: sthrnfat on 01/29/2008 | 08:53 PM |
|
Did it seem to hold the chain well? Don't want to have to worry about dropping the chain.
|
| Back To Top |
|
| POSTED BY: rob1035 on 02/17/2008 | 02:56 PM |
|
I'd recommend the Rennen Rollenlager. I started out my SS conversion using a spring-tensioner (forte, so not the best), and it worked fine, but I didn't like the noise or the chain movement over bumpy stuff. Converted to the Rennen, and the chain is rock solid, no drops, and the reduction in noise is AWESOME. Its a PIA to pull the rear wheel compared to a spring loaded tensioner however, the one negative.
|
| Back To Top |
|
|
